Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw G310 R
Part: Air filter

To remove the air filter of the BMW G310 R, you will need to lift the motorcycle seat so that you can access the screws that secure the tank at the front of the vehicle. Once these screws are unscrewed, along with those on the side of the tank, you can detach the tank and access the air filter box at the bottom. This box will need to be opened in order to remove the old air filter from the inside, so that it can be replaced with a new spare part. After the replacement, you will need to reassemble the seat and tank that were previously removed.

Posted on 25 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the BMW G310 R
How to replace the air filter of the BMW G310 R
G310 R Today we will see the step-by-step instructions on how to disassemble and replace the air filter of the engine of the BMW G310 R motorcycle. First, p…
How do you replace the air filter of the BMW G310 R?
How do you replace the air filter of the BMW G310 R?
G310 R The air filter installed on board the BMW G310 R can be reset by lifting the motorcycle seat, in order to access the screws that secure the tank in t…
How do you replace the air filter of the BMW G310 R?
How do you replace the air filter of the BMW G310 R?
G310 R To replace the air filter of the BMW G310 R, it will be necessary to lift the motorcycle seat so that it is possible to access the screws that secure…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos