Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front wheel of the BMW R1150 RT

Model: Bmw R1150 Rt
Part: Wheel

Video tutorial

In this guide, we will see the instructions that will allow us to disassemble and remove the front wheel of the BMW R1150 RT. First, we place the motorcycle on the stand and start loosening the two screws located on both sides of the fork; we unscrew the central axle of the wheel using a socket wrench with an extension, as shown in the video.

At this point, we lift the front wheel off the ground, remove the front fender, and thus slide out the front wheel; we perform the tire replacement or make the necessary repairs, and finally reassemble the front wheel.


Posted on 26 December 2025 by ScegliAuto


Related tutorials

Removing the Rear Wheel from a BMW R1150 RT
Removing the Rear Wheel from a BMW R1150 RT
R1150 Rt In today's tutorial, you will learn how to remove the rear wheel from a BMW R1150 RT by following these instructions. First, place the motorcycle on …
Removing the rear wheel of the BMW R1150 RT
Removing the rear wheel of the BMW R1150 RT
R1150 Rt This guide shows the steps to remove and replace the rear wheel of the BMW R1150 RT motorcycle. First, place the motorcycle on the centre stand and s…
Replacing the Battery on the BMW R1150 RT
Replacing the Battery on the BMW R1150 RT
R1150 Rt Today's video will show you the steps to remove and replace the battery on the BMW R1150 RT motorcycle. First, place the bike on the centre stand and…

How to Change the Engine Oil in the Yamaha MT-15?

In this tutorial, you will learn how to change the engine oil in the Yamaha MT-15, a very simple and quick operation. First, ensure that the engine is cool enough. Then, position a container beneath the motorcycle, locate the drain bolt, and loosen it using a socket spanner. Allow all the oil in the system to drain out. Next, open the filter cap and insert the replacement. Finally, reassemble everything and pour in the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos