Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To reset the service light on a BMW R NineT, you need to use the diagnostic socket and the Uniscam diagnostic computer. Open the motorcycle seat and remove the battery cover, connect the computer to the socket and download the Uniscam app on your phone. Access the app and select the motorcycle model, then select the operation you wish to perform, in this case, the service reset, and start the update of the mileage for the next service. Once the operation is complete, restart the motorcycle's instrument panel and disconnect the socket.

Posted on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a BMW R NineT?
How to Change the Engine Oil in a BMW R NineT?
R Ninet In this tutorial, you will see how to change the engine oil in a BMW R NineT, a very simple and quick operation. First, wait until the engine is suff…
How to replace the battery of the BMW R Ninet
How to replace the battery of the BMW R Ninet
R Ninet Today we will see step by step instructions on how to disassemble and replace the battery of the BMW R Ninet, in simple steps. First, we place the mo…
How to replace the spark plugs in the BMW R NineT
How to replace the spark plugs in the BMW R NineT
R Ninet In this tutorial we can see how to replace the spark plugs in the BMW R NineT, an extremely simple and quick operation. First of all, make sure that …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos