Do it yourself
Frequently asked questions about cars and motorcycles

Model: Bmw R Ninet
Part: Engine oil

In this tutorial, you will see how to change the engine oil in a BMW R NineT, a very simple and quick operation. First, wait until the engine is sufficiently cold, then position a container underneath the bike, locate the drain bolt, and unscrew it using an 8 mm hex key. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the bolt. At this point, simply pour the required amount of oil through the designated upper hole.

Posted on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

R Ninet To reset the service light on a BMW R NineT, you need to use the diagnostic socket and the Uniscam diagnostic computer. Open the motorcycle seat and …
R Ninet Today we will see step by step instructions on how to disassemble and replace the battery of the BMW R Ninet, in simple steps. First, we place the mo…
R Ninet In this tutorial we can see how to replace the spark plugs in the BMW R NineT, an extremely simple and quick operation. First of all, make sure that …

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos