Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of a BMW R1200 GS LC Adventure

Model: Bmw R 1200 Gs Lc
Part: Battery

Video tutorial

In this video tutorial, you will learn how to remove and replace the battery of a BMW R1200 GS LC. First, remove the right side plastic panel by unscrewing the fastening screw; then disconnect the diagnostic cable and remove the nut securing the negative terminal using a 10 mm socket spanner.

At this point, gently pull out the battery and disconnect the other terminal, also using the socket spanner.

Finally, replace it with a new one of the correct type and same amperage, reconnect the terminals, and reassemble everything!


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a BMW R 1200 GS LC?
R 1200 Gs Lc To replace the battery on a BMW R 1200 GS LC, you need to use a screwdriver to loosen the screws that secure the protective cover on the right side o…
How to replace the tyre pressure sensor battery on a 2018 BMW R 1200 GS
How to replace the tyre pressure sensor battery on a 2018 BMW R 1200 GS
R 1200 Gs Lc Today, we will explain how to replace the battery of the tyre pressure sensor on a 2018 BMW R 1200 GS LC motorcycle. The operation of the sensor is c…
Replacing the Air Filter on a BMW R 1200 GS LC
Replacing the Air Filter on a BMW R 1200 GS LC
R 1200 Gs Lc Before proceeding to replace the air filter on the BMW R 1200 GS LC, ensure the bike is stable and secure on its stand. This precaution, which should…

How to replace the transmission oil seal on the KTM XC 250

This guide provides the main instructions for removing and replacing the transmission oil seal on the KTM XC 250 enduro bike, as well as the XC-W 250. First, place your bike on a stand and begin by removing the gear lever by unscrewing its bolt; then remove the transmission cover and use something thin and pointed to extract the oil seal, as shown in the video. At this point, correctly install the new oil seal, pressing it in until it is flush, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos