Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw R Ninet
Part: Battery

Start by removing the rear seat secured by a screw underneath, then remove the main seat as well. Dismantle the two rear side plastics, as shown in the video, secured by a bolt: these must be removed; otherwise, you cannot detach the tank, which is your next step. The tank is also secured by two side bolts, one on each side. Once you have extracted the tank from its position, you can finally disconnect the battery terminals (first the negative terminal and only then the positive), remove it from the clips, and replace it. Proceed in reverse for reassembly. Good luck!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery of the BMW R Nine T
How to Replace the Battery of the BMW R Nine T
R Ninet This guide will show you how to remove and replace the battery of the BMW R Nine T. First, place your motorcycle on the centre stand and begin by rem…
How to replace the battery of the BMW R Ninet
How to replace the battery of the BMW R Ninet
R Ninet Today we will see step by step instructions on how to disassemble and replace the battery of the BMW R Ninet, in simple steps. First, we place the mo…
How to Reset the Service Light on BMW R NineT
How to Reset the Service Light on BMW R NineT
R Ninet To reset the service light on a BMW R NineT, you need to use the diagnostic socket and the Uniscam diagnostic computer. Open the motorcycle seat and …

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos