Do it yourself
Frequently asked questions about cars and motorcycles

Model: Bmw K1200 S
Part: Battery

Let’s see in this video how to remove and replace the battery on a BMW K1200 S, in simple and quick steps. Locate the battery near the fuel tank; then undo the two securing screws to remove its cover and access it, as shown in the video. Now undo the screws of the terminals (positive and negative) to disconnect them, and remove the battery. At this point, replace it with a new one of the correct type and the same amperage, reassembling everything by applying the reverse procedure of disassembly!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

K1200 S In this video tutorial, you will learn how to remove and replace the battery of the BMW K1200 S motorcycle. First, place the bike on its stand and be…
K1200 S Today, you will learn how to perform a routine maintenance service by replacing the engine oil and oil filter on a BMW K1200 S. First, warm up the en…
K1200 S In this guide, follow the steps to replace the coolant in the BMW K1200S motorcycle. First, place your bike on a stand and start removing the side pl…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos