Do it yourself
Frequently asked questions about cars and motorcycles

Model: Bmw K1200 S
Part: Engine oil

Today, you will learn how to perform a routine maintenance service by replacing the engine oil and oil filter on a BMW K1200 S. First, warm up the engine for a few minutes; then, position the centre stand and unscrew the oil drain bolt located under the engine. Use a socket spanner to let all the oil drain into a container for about ten minutes. Next, remove the oil filter located right next to the sump; replace it with a new one, remembering to screw it in by hand. Finally, fill the engine with oil!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

K1200 S Let’s see in this video how to remove and replace the battery on a BMW K1200 S, in simple and quick steps. Locate the battery near the fuel tank; the…
K1200 S In this video tutorial, you will learn how to remove and replace the battery of the BMW K1200 S motorcycle. First, place the bike on its stand and be…
K1200 S In this guide, follow the steps to replace the coolant in the BMW K1200S motorcycle. First, place your bike on a stand and start removing the side pl…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos