Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Instrument Cluster Bulb on the BMW R1200 GS

Model: Bmw R1200gs
Part: Instrument panel light

Video tutorial

This video tutorial shows how to dismantle and replace the bulbs in the instrument cluster on the BMW R1200 GS motorcycle, following the instructions below. First, remove the instrument cluster by unscrewing the screws located at the back; then disconnect the electrical connector by pressing the two side tabs, as shown in the video.

At this point, remove the plastic clips to access the electronic board and the bulbs; take them out and replace them with new bulb-type ones. Then reassemble everything by applying the reverse procedure!


Updated on 30 April 2026 by ScegliAuto


Related tutorials

Replacing Front Headlight Bulb on BMW R1200 GS
Replacing Front Headlight Bulb on BMW R1200 GS
R1200gs In today's tutorial, you will learn how to replace the front headlight bulb on a BMW R1200 GS in simple steps. First, unscrew the screws located on t…
How to Replace the Front Headlight Bulbs on a BMW R1200 GS
How to Replace the Front Headlight Bulbs on a BMW R1200 GS
R1200gs In this guide, discover the procedure necessary for disassembling and replacing the front headlight bulbs on a BMW R1200 GS motorcycle. First, start …
How to remove the rear light on the BMW R1200 GS?
How to remove the rear light on the BMW R1200 GS?
R1200gs This tutorial shows how to remove the rear light on the BMW R1200 GS, a very simple and quick operation, for example, to replace a bulb or the entire…

How to Set the Time on the Suzuki V-Strom 650?

In this tutorial, learn how to set the time on the Suzuki V-Strom 650, a simple and quick operation, for instance, after replacing the battery or switching to daylight saving time. First, insert the key, then turn on the instrument cluster and press both the "MODE" button upwards and the button to the left of the speedometer. Wait for the time to start flashing, release both buttons, and adjust the clock using the button on the dashboard. To save the setting, wait a few seconds.

Watch the video!


by ScegliAuto

More videos