Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's tutorial, you will learn how to replace the front headlight bulb on a BMW R1200 GS in simple steps. First, unscrew the screws located on the side of the headlight; then, remove the front light unit. At this point, remove the plastic protective cap of the bulbs and disconnect the electrical connector of the bulb; then, unclip the metal spring to remove it. Finally, replace the bulb with a new one of the correct type (in this case, a LED bulb is fitted); reassemble everything by applying the reverse procedure!

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs on a BMW R1200 GS
How to Replace the Front Headlight Bulbs on a BMW R1200 GS
R1200gs In this guide, discover the procedure necessary for disassembling and replacing the front headlight bulbs on a BMW R1200 GS motorcycle. First, start …
How to Reset the "Service" Light on a BMW R1200 GS
How to Reset the "Service" Light on a BMW R1200 GS
R1200gs Before you begin, position your BMW R1200 GS on its side stand. Start by connecting the OBD reader to the bike's port. Next, open the "MOTO SCAN" app…
Replacing the Instrument Cluster Bulb on the BMW R1200 GS
Replacing the Instrument Cluster Bulb on the BMW R1200 GS
R1200gs This video tutorial shows how to dismantle and replace the bulbs in the instrument cluster on the BMW R1200 GS motorcycle, following the instructions…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos