|
Do it yourself
| |||
| ||||
Model: Bmw R1200 Rs
In this video, you will see how to remove and replace the front and rear brake pads on a BMW R1200 RS motorcycle in simple steps. Start with the rear pads by removing the locking pin with pliers; then extract the pads from the brake caliper and replace them with new ones, as shown in the video. Next, move to the front brakes; remove the locking clip and use a Torx key to unscrew the central pin: now you can remove the brake pads, applying the reverse procedure for reassembly!
Updated on 5 May 2026 by ScegliAuto
Video tutorial
Related tutorials
R1200 Rs
It will be possible to replace the air filter of the BMW R1200 RS by loosening the screws that secure the filter protection panel, located in front o…
R1200 Rs
In this tutorial, see how to replace the remote battery of the BMW R1200 RS, a very simple and quick operation. You will need a replacement CR2032 ba…
R1200 Rs
This guide shows how to replace the air filter on the BMW R 1200 RS. The air filter is located under the fuel tank, so you need to remove the seat us…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.053
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
