Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Grips on a BMW R1200 GS

Model: Bmw R1200gs
Part:

Video tutorial

Today, you will see in this tutorial how to disassemble and replace the grips on a BMW R1200 GS motorcycle by following the instructions below. First, place your motorcycle on the centre stand and start using a utility knife to remove the rubber from the heated grips; once removed, clean the handlebars with suitable degreasers as shown in the video.

At this point, install the new grips, lightly lubricating the inside to facilitate insertion; then check the functionality of the heated grips!


Updated on 2 July 2026 by ScegliAuto


Related tutorials

R1200gs Before you begin, position your BMW R1200 GS on its side stand. Start by connecting the OBD reader to the bike's port. Next, open the "MOTO SCAN" app…
R1200gs In this tutorial, you will see how to change the engine oil in a BMW R1200 GS, a very simple and quick operation. First, wait for the engine to cool …
R1200gs This brief guide explains how to remove the front wheel of a BMW R1200 GS in simple, quick steps. First, lift the motorcycle using the front stand an…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos