Do it yourself
Frequently asked questions about cars and motorcycles

Model: Bmw R1200gs
Part: Engine oil

As shown in this tutorial, changing the engine oil on the BMW R1200GS Adventure is a very simple and quick operation. First, wait for the engine to cool sufficiently, then position a container underneath and remove the protective metal cover. Next, unscrew the drain hole bolt with an Allen key, allow all the oil in the system to drain, and proceed to unscrew the old filter. At this point, simply tighten the replacement, reassemble everything, and add the required amount of oil through the designated hole.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

R1200gs Before you can start, position your BMW R1200GS on the centre stand. Begin by loosening and removing the central nut that secures the rear wheel to t…
R1200gs In this tutorial, you will learn how to remove and replace the air filter on a BMW R1200 GS Adventure motorbike. First, place your bike on the centre…
R1200gs Follow these instructions to remove and replace the battery of the BMW R1200GS enduro motorcycle. First, place your bike on the stand and start by re…

How to remove the engine from the GasGas EC 300?

To remove the engine from the GasGas EC 300, you need to loosen the bolts that secure it to the frame supports at the central lower part of the vehicle: once all the bolts securing it to these supports are loosened, you can disconnect the coil and all other connectors related to the sensors on the engine. By also loosening the bolts of the ducts, you can now completely remove the engine from its housing, allowing you to insert the new replacement part: once installed, you can check that everything functions correctly.

Watch the video!


by ScegliAuto

More videos