Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wheel of a BMW R1200GS

Model: Bmw R1200gs
Part: Wheel

Video tutorial

Before you can start, position your BMW R1200GS on the centre stand. Begin by loosening and removing the central nut that secures the rear wheel to the hub. Once you have removed the central fastening nut, the rear wheel will be free.

Next, disengage and extract the rear wheel from the hub. After completing this step, you can finally remove the rear wheel of your BMW R1200GS, successfully finishing the disassembly.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Wheel on a BMW R1200 GS (2016)
How to Remove the Rear Wheel on a BMW R1200 GS (2016)
R1200gs Today, you will learn the steps needed to remove the rear wheel on a BMW R1200 GS motorcycle. First, lift the motorcycle with a jack to raise the rea…
How to Replace the Key Battery on the BMW R1200GS
How to Replace the Key Battery on the BMW R1200GS
R1200gs If your BMW R1200GS key has suddenly stopped working, it is likely time to replace the battery inside the cover. Below are the steps to follow. First…
How to Remove the Rear Wheel of the BMW R1200 GS
How to Remove the Rear Wheel of the BMW R1200 GS
R1200gs In this tutorial video, you will learn how to remove and replace the rear wheel and tyre of the BMW R1200 GS motorcycle, following the instructions b…

Vespa Immobiliser: How to Transfer the Chip from the Old Key

In the case shown in the video, the new keys are not recognised by the ECU: the Vespa starts but does not run (thus the immobiliser is active). The solution shown in the video involves locating the immobiliser chip in the old key (the one recognised by the ECU). Open the cover on the key (only red master keys or some blue ones), remove the chip (which is a small black cylinder or rectangle), insert it into the new key in place of the new one, and try to start. Now the key will work. If the master key is red, it will definitely work. If it is blue, it might work: you need to cut the silicone; this is possible but a delicate operation. If it is a black clone key, then it is a system that does not work.

Watch the video!


by ScegliAuto

More videos