Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Drive Belt on a BMW F800 ST

Model: Bmw F800 St
Part:

Video tutorial

Today's instructions will show you how to remove and replace the drive belt on the BMW F800 ST motorcycle. First, place the bike on a stand and start by unscrewing the adjustment screw located next to the drive belt; then disconnect and completely remove the belt from the pulley, as shown in the video.

At this point, install the new original drive belt, ensuring it is correctly positioned and finally adjust it; then tighten the screw next to the belt, following the video tutorial until the end for reassembly!


Updated on 31 August 2026 by ScegliAuto


Related tutorials

How to Service the BMW F800 ST
How to Service the BMW F800 ST
F800 St This brief and simple guide will show you how to perform the routine maintenance service on the oil change for the BMW F800 ST motorcycle. First, pla…
How to Perform Routine Maintenance on the BMW F800 ST
How to Perform Routine Maintenance on the BMW F800 ST
F800 St Today's procedure will show you how to carry out routine maintenance, which includes changing the engine oil and various filters, on the BMW F800 ST …

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos