Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform Routine Maintenance on the BMW F800 ST

Model: Bmw F800 St
Part: Checks and maintenance

Video tutorial

Today's procedure will show you how to carry out routine maintenance, which includes changing the engine oil and various filters, on the BMW F800 ST motorcycle. First, place the motorcycle on a stand and begin loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Next, remove the screws from the oil filter cover and replace the cartridge with a new one, as shown in the video. At this point, replace the air filter and spark plugs if necessary, thus completing the routine maintenance.


Updated on 1 September 2026 by ScegliAuto


Related tutorials

How to Service the BMW F800 ST
How to Service the BMW F800 ST
F800 St This brief and simple guide will show you how to perform the routine maintenance service on the oil change for the BMW F800 ST motorcycle. First, pla…
How to Replace the Drive Belt on a BMW F800 ST
How to Replace the Drive Belt on a BMW F800 ST
F800 St Today's instructions will show you how to remove and replace the drive belt on the BMW F800 ST motorcycle. First, place the bike on a stand and start…

How to Replace the Front Headlight on a Husqvarna 701?

To replace the front headlight on a Husqvarna 701, first loosen the screws that secure the front fairing laterally. Once the screws are loosened, you can detach the fairing and subsequently disconnect all the connectors attached inside. Once the fairing is released, loosen the screws located inside to completely detach the old headlight from the fairing. At this point, insert the new headlight, connect it and secure it with screws, then reinstall the fairing in the corresponding housing.

Watch the video!


by ScegliAuto

More videos