Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a BMW R1150 GS?

Model: Bmw R1150 Gs
Part: Engine oil

Video tutorial

In this tutorial, see how to change the engine oil in the BMW R1150 GS, a simple and quick operation to perform every 12 months. First, ensure the engine is sufficiently cool.

Then, position a container underneath the bike, locate the drain bolt, and loosen it using an 8 mm hex key. Allow all the oil in the system to drain out, then remove the old filter with the appropriate tool and tighten both the new filter and the bolt.

Finally, pour the new oil through the designated upper hole.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the BMW R1150 GS?
How to Change the Engine Oil in the BMW R1150 GS?
R1150 Gs In this tutorial, you will see how to change the engine oil in the BMW R1150 GS, a very simple and quick operation. First, ensure that the engine is …
How to replace the engine oil in the BMW R1150 GS?
How to replace the engine oil in the BMW R1150 GS?
R1150 Gs In this tutorial we can see how to replace the motor oil in the BMW R1150 GS, an extremely simple and quick operation. First of all, make sure that t…
How to Change the Engine Oil in the BMW R1150 GS?
How to Change the Engine Oil in the BMW R1150 GS?
R1150 Gs In this tutorial, you will see how to change the engine oil in the BMW R1150 GS, a very simple and quick operation. First, wait for the engine to coo…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos