|
Do it yourself
| |||
| ||||
Video tutorial
This guide will illustrate the steps to remove and replace the front wheel and tyre of the BMW K1600, following the instructions below. First, place the motorcycle on a stand and start unscrewing the screws securing the front brake calipers, removing them from the disc. Then, loosen the central axle of the wheel using a socket wrench with an extension, as shown in the video. At this point, insert the front stand to lift the wheel off the ground; then remove the wheel, applying the reverse procedure for reassembly!
Updated on 15 September 2026 by ScegliAuto
Related tutorials
K1600
In order to replace the front wheel of the BMW K1600, you need to loosen the screws that secure the front brake caliper to the corresponding disc: on…
K1600
It will be possible to replace the front brake pads of the BMW K1600 by loosening the screws that secure the brake caliper corresponding to the speci…
K1600
To adjust the valves on the BMW K1600, loosen the screws securing the valve cover, located at the lower front of the bike, just behind the front whee…
|
How to Replace the Variator of the Honda PCX 125
This guide outlines the steps to remove and replace the variator of the Honda PCX 125 scooter. First, place the scooter on its centre stand and begin by removing the clutch cover by unscrewing the fastening screws. Next, unscrew the central nut of the fan and the one on the clutch bell, then remove the belt and the variator, as shown in the video. Now, install the new variator with the new rollers, reassemble the belt and the entire transmission, and finally refit the cover! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
