Do it yourself
Frequently asked questions about cars and motorcycles
This guide will show you the steps to reset the Trip A mileage on the BMW R1250 GS enduro motorcycle. First, place the bike on its centre stand and turn on the instrument panel. Navigate to the menu settings by pressing the button located on the left of the handlebars, and access the onboard computer where the partial mileage is displayed, as shown in the video. At this point, reset the partial mileage as indicated in the video; you can reset the partial mileage at any time.

Updated on 23 September 2026 by ScegliAuto

Video tutorial

Related tutorials

R1250 Gs To change the engine oil of a BMW R1250 GS, start by placing the motorcycle on a flat surface. Then, lift the motorcycle on the center stand. Remove …
R1250 Gs Resetting the service on the BMW R1250 GS, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure you have …
R1250 Gs As shown in this tutorial, replacing the remote battery on the BMW R1250 GS is a very simple and quick operation. For this, you will need a replaceme…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos