Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil in the BMW F850 GS?

Model: Bmw F 850 Gs
Part: Engine oil

Video tutorial

In this tutorial, see how to change the engine oil in the BMW F850 GS, a very simple and quick operation. First, wait for the oil to cool sufficiently to operate safely, then position a container underneath the bike, locate the drain bolt, and unscrew it using a 5 mm hex key. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement filter and the bolt.

At this point, simply pour in the required amount of oil through the designated top hole.


Updated on 25 September 2026 by ScegliAuto


Related tutorials

How to Replace the Levers on the BMW F850 GS?
How to Replace the Levers on the BMW F850 GS?
F 850 Gs To replace the levers on the BMW F850 GS, loosen the screws securing the central nut on the pin that holds the lever in its housing. Once this nut is…
How to Change Engine Oil on BMW F 850 GS
How to Change Engine Oil on BMW F 850 GS
F 850 Gs You can change the engine oil on the BMW F 850 GS by undoing the drain plug located at the central lower part of the vehicle. Once this plug is remov…
How do you replace the spark plugs of the BMW F 850 GS?
How do you replace the spark plugs of the BMW F 850 GS?
F 850 Gs In order to replace the spark plugs of the BMW F 850 GS, you need to loosen the screws that secure some bulky components located on top of the engine…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Front Headlight Bulbs on a Kawasaki ZX-6R?

In this tutorial, you will see how to replace the front headlight bulbs on a Kawasaki ZX-6R, a very simple and quick operation. First, ensure that the key is not inserted for safety, then locate the cap at the back of the headlight and remove it. Next, disconnect the power connector, unclip the metal retaining clip, and remove the old bulb from the housing. At this point, simply insert the replacement, avoiding direct contact with bare hands, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos