Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Mirrors on the Harley Davidson Sportster

Model: Harley Davidson Sportster
Part:

Video tutorial

Below are the steps to remove and replace the mirrors on the Harley Davidson Sportster. First, place the motorcycle on a stand and start unscrewing and removing the nut found under the mirror, holding the mirror steady with a spanner.

Then, install the new mirror by inserting the accessory and the new nut to secure it properly, as shown in the video. At this point, adjust the mirror, applying the same procedure for replacing the other mirror!


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to replace the instrument cluster bulb on the Harley Davidson Sportster?
How to replace the instrument cluster bulb on the Harley Davidson Sportster?
Sportster To replace the instrument cluster bulb on the Harley Davidson Sportster, disconnect the corresponding connector located at the back of the instrument…
Replacing the Battery of the Harley Davidson Sportster
Replacing the Battery of the Harley Davidson Sportster
Sportster This guide will show you the steps to remove and replace the battery of the Harley Davidson Sportster motorcycle, following the instructions below. F…
How to Replace the Rear Tyre on the Harley Davidson Sportster
How to Replace the Rear Tyre on the Harley Davidson Sportster
Sportster This guide shows you the steps to replace the rear tyre on the Harley Davidson Sportster. First, place your bike on a stand and start unscrewing the …

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos