Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Levers on the BMW F850 GS?

Model: Bmw F 850 Gs
Part:

Video tutorial

To replace the levers on the BMW F850 GS, loosen the screws securing the central nut on the pin that holds the lever in its housing. Once this nut is removed, you can proceed by pulling out the pin and disconnecting the cable attached to the corresponding lever.

Perform the same operation for the other lever, then insert the new replacement parts: these levers must be secured in their housing by inserting the corresponding pin and reconnecting the cable, ensuring everything functions correctly.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How to Change Engine Oil in the BMW F850 GS?
How to Change Engine Oil in the BMW F850 GS?
F 850 Gs In this tutorial, see how to change the engine oil in the BMW F850 GS, a very simple and quick operation. First, wait for the oil to cool sufficientl…
How to Change Engine Oil on BMW F 850 GS
How to Change Engine Oil on BMW F 850 GS
F 850 Gs You can change the engine oil on the BMW F 850 GS by undoing the drain plug located at the central lower part of the vehicle. Once this plug is remov…
How do you replace the front brake pads on the BMW F 850 GS?
How do you replace the front brake pads on the BMW F 850 GS?
F 850 Gs To replace the front brake pads of the BMW F 850 GS, you need to loosen the screws that secure the caliper to its housing. This will allow you to rem…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Front Headlight Bulbs on a Kawasaki ZX-6R?

In this tutorial, you will see how to replace the front headlight bulbs on a Kawasaki ZX-6R, a very simple and quick operation. First, ensure that the key is not inserted for safety, then locate the cap at the back of the headlight and remove it. Next, disconnect the power connector, unclip the metal retaining clip, and remove the old bulb from the housing. At this point, simply insert the replacement, avoiding direct contact with bare hands, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos