Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Bmw
    3. :
  3. F650 Gs
    4. : Disassembly of the rear wheel of the BMW F650 GS

Model: Bmw F650 Gs
Part: Wheel
Disassembly of the rear wheel of the BMW F650 GS

Today we will discover the main steps that will allow us to disassemble and replace the rear wheel of the BMW F650 GS motorcycle. First of all, we put our motorcycle on the center stand and start to disassemble and remove the central wheel axle, using a socket wrench with extension; then we disconnect the brake caliper from the disc, unscrewing the fixing screws, as shown in the video. At this point we remove the rear wheel, disconnecting the drive chain; if necessary, we replace the tire with a new one, applying the reverse procedure for reassembly!


Posted on 13 May 2024 by ScegliAuto



How to replace the headlight bulb in the BMW F650 GS?
F650 Gs In this tutorial we can see how to replace the headlight bulb in the BMW F650 GS, an extremely simple and quick operation. First of all, make sure th
Change the coolant on the BMW F650 GS
F650 Gs Let's find out how to change the coolant or antifreeze on a BMW F650 GS, in simple and quick steps. First of all we put the central stand on our moto
How to replace the battery in the BMW F650 GS?
F650 Gs In this tutorial, we can see how to replace the battery in the BMW F650 GS, an extremely simple and quick operation. First of all, make sure that the

How to change the bulb and dashboard of the Honda SH 150

This guide shows the procedure for removing and replacing the bulb and dashboard for the 2013 Honda Sh 150 model. The Sh models up to 2016 are eligible for this job. For this procedure, the following steps must be performed: 1. Disassemble the visor by removing its 4 nuts; 2. Disassemble the 6 nuts of the side bezels, 3 for each, of which 4 of 6 are press fit, for the latter it is necessary to pay particular attention during removal; 3. Remove the 4 screws of the lower plastic cup, located under the handlebar; 4. Remove the remaining rubbers and front fairings not mentioned above and proceed with the removal of the bulb and, if necessary, with the replacement of the spare part.

Watch the video!


by ScegliAuto

More videos