Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw F650 Gs
Part: Engine oil

To change the motor oil of a BMW F650GS, start by warming up the engine for a few minutes to make the oil more fluid, then turn it off. Place the motorcycle on a central or side stand to ensure stability. Under the engine, locate the oil drain plug. Place a basin under the plug to collect the used oil. Use a wrench to unscrew the drain plug and let the oil drain completely into the basin. Once all the oil has been drained, put the drain plug back in place and tighten it securely. Now, locate the oil fill cap on the top of the engine. Remove the cap and use a funnel to slowly pour the recommended amount of new oil from the owner's manual. Make sure not to exceed the maximum level. Once done, put the fill cap back on and secure it properly. Check the oil level using the dipstick to ensure it is at the correct level. If necessary, add oil. Finally, start the engine for a few minutes, check the oil level again, and make sure there are no leaks.

Posted on 26 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of a BMW F650GS?
How to change the motor oil of a BMW F650GS?
F650 Gs To change the motor oil of the BMW F650GS, start by positioning the motorcycle on a stable support to ensure the correct tilt. Remove the drain plug …
How do you replace the front headlight bulb on a BMW F650GS motorcycle?
How do you replace the front headlight bulb on a BMW F650GS motorcycle?
F650 Gs Don't panic, replacing the front headlight bulb on a BMW F650GS is not complicated but requires a bit of attention. Turn off the engine and disconnec…
Guide to Changing Engine Oil and Oil Filter on BMW F650
Guide to Changing Engine Oil and Oil Filter on BMW F650
F650 Gs This guide outlines the steps to perform routine maintenance by changing the engine oil and oil filter on the BMW F650 GS. First, place your bike on …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos