Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw F650 Gs
Part: Engine oil

To change the motor oil of the BMW F650GS, start by positioning the motorcycle on a stable support to ensure the correct tilt. Remove the drain plug located under the engine and let the used oil drain completely into a suitable container. Once the oil has been completely drained, replace the drain plug and tighten it securely. Use a filling pump to insert the new motor oil through the designated filling opening, usually located on the top of the engine. Make sure to use the oil with the specification recommended by the manufacturer. After filling the oil, check for any leaks and start the engine for a few minutes, then turn it off and check the oil level to ensure it is correct. Complete the job by making sure everything is back in place and there are no leaks.

Posted on 9 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of a BMW F650GS?
How to change the motor oil of a BMW F650GS?
F650 Gs To change the motor oil of a BMW F650GS, start by warming up the engine for a few minutes to make the oil more fluid, then turn it off. Place the mot…
How do you replace the front headlight bulb on a BMW F650GS motorcycle?
How do you replace the front headlight bulb on a BMW F650GS motorcycle?
F650 Gs Don't panic, replacing the front headlight bulb on a BMW F650GS is not complicated but requires a bit of attention. Turn off the engine and disconnec…
How to replace the engine oil in the BMW F650 GS?
How to replace the engine oil in the BMW F650 GS?
F650 Gs In this tutorial, we can see how to replace the motor oil in the BMW F650 GS, an extremely simple and quick operation. First of all, make sure that t…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos