Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Serie 5
  6. : Hydraulic pistons

BMW Serie 5 - Hydraulic pistons

BMW Serie 5 (1995-2003 / E39)
How to replace the hydraulic pistons of the rear trunk lid of a BMW 5 Series

Before starting, we will have to open the tailgate of the luggage compartment of our BMW 5 Series. Let's start by unhooking the hooks that secure the hydraulic …read all…
Posted on 14 March 2024 by ScegliAuto
BMW Serie 5 (1995-2003 / E39)
How to replace the hydraulic pistons

The hydraulic pistons slide according to the oil pressure, moving the rotor pads in or out. This guide shows the equipment and procedures for the care and …read all…
Posted on 7 September 2023 by ScegliAuto
BMW Serie 5 (1995-2003 / E39)
Rear hood gas spring replacement

If it happens that the rear bonnet does not support itself when opened, then it means that the support piston is discharged; the replacement is very simple to …read all…
Posted on 31 August 2023 by ScegliAuto
BMW Serie 5 (1995-2003 / E39)
Removing the rear hood pistons

The support pistons of the rear bonnet (these are gas springs) of the car model in question are not installed in the traditional way, ie perpendicular to the …read all…
Posted on 15 August 2023 by ScegliAuto
BMW Serie 5 (1995-2003 / E39)
Rear bonnet support pistons replacement

The pistons (these are actually gas springs) that support the rear bonnet during the opening and closing phase are not visible externally as on almost all …read all…
Posted on 9 August 2023 by ScegliAuto

Accelerator (1) Cigarette Lighter (2) Airbags (4) Alternator (7) Loudspeaker (3) Shock absorbers (4) Air conditioning (6) Car stereo (8) Anti roll bar (1) Battery (13) Coil (1) Air Vents (6) Bushings (2) Arm (3) Grille (2) Gearbox (8) Spark plugs (5) Glow plugs (1) Carburetor (1) Bodywork (26) Glove box (2) Snow chains (1) Control unit (7) Wheel rim (1) Key (34) Locking the trunk (3) Timing belt (12) V-belt (8) Air conditioning (2) Air conditioning controls (2) -board computer (16) Checks and maintenance (71) Throttle body (4) Dashboard (8) Bearing (6) Brake discs (2) Rear bench seat (2) Electric fan (1) Side indicator light (2) Headlight (17) Tail light (1) Fog lights (2) Particulate filter (1) Air filter (8) Cabin air filter (18) Petrol filter (3) Diesel filter (2) Oil filter (2) Clutch (1) Grille (2) Injectors (1) Accessory Kit (15) Light bulb (5) Side turn signal light bulb (1) Headlight bulb (19) Rear light bulb (2) Interior lights ceiling light bulb (7) Antifreeze liquid (11) License plate light (3) Third brake light (1) Rear window (1) Handle (13) Mask (1) Engine (30) Window motor (8) Starter motor (1) Gear oil (4) Brake oil (2) Engine oil (7) Power steering oil (3) Door panel (24) Windshield (1) Front bumper (3) Rear bumper (2) Brake pads (9) Hydraulic pistons (5) Tires (7) Gear Shift Knob (4) Pump (6) Fuel pump (4) Door (4) Push button (1) Instrument cluster (10) Radiator (10) Wheel (4) Fuse box (34) Seat (22) Crankshaft RPM sensor (3) Parking sensors (1) Lock (1) Brake system (2) Lambda sensor (1) Suspensions (1) Outside rearview mirror (14) Interior rearview mirror (3) Manufacturer's coat of arms (1) Windscreen wipers (14) Thermostat (9) Transmission (1) Central tunnel (5) Turbine (1) Valve (6) EGR valve (3) Interior blower (5) Side window (2) Steering wheel (2)

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos