Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Dome Light of the BMW 5 Series

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Interior dome light bulb

Video tutorial
Detailed instructions - Are the bulbs inside the dome light burnt out? Let's see how to remove and replace it. Use a screwdriver to pry between the dome light and the headliner (do not tear the headliner), pull the dome light out from the headliner, and disconnect the power connector. Replace the damaged bulbs with new ones (same size and voltage), and replace the dome light if it is damaged. Connect the electrical connector to the dome light, install it back into the headliner (push the plastic with your hands until it is fully secured in the headliner). Test the proper operation of the dome light.

Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to replace the lights of the interior dome light of the BMW 5 Series
How to replace the lights of the interior dome light of the BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) The steps outlined in this guide will show us how to disassemble and replace the lights of the interior dome light of the BMW 5 Series. First, we get…
How to disassemble the headlight ceiling of the BMW Series 5.
How to disassemble the headlight ceiling of the BMW Series 5.
BMW Serie 5 (2003-2010 / E61, E60) In this guide, we will see the instructions that will allow us to disassemble and replace the ceiling light of the front headlight of the BMW Series …
How to Replace the Bulbs or LEDs in the Ceiling Light of a BMW 5 Series
How to Replace the Bulbs or LEDs in the Ceiling Light of a BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) In this video, see how to replace the bulbs or LEDs in the ceiling light of a BMW 5 Series. Use a screwdriver or plastic trim tool to pry between the…

How to Open the Fuel Filler Flap on a 2020 Hyundai i20

Today, you will learn the steps to open the fuel filler flap on a 2020 Hyundai i20. The steps to follow are: - Open the vehicle or turn off the engine if you are already in the vehicle; - Sit in the driver's seat; - Lift the lever located at the bottom left, near the pedal area; - Go to the flap; - Press on the flap; Once the flap is open, you can remove the cap and refuel the vehicle. Then close the cap and flap by pushing inward. Finally, start the vehicle and continue your journey.

Watch the video!


by ScegliAuto

More videos