Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the lights of the interior dome light of the BMW 5 Series

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Interior dome light bulb

The steps outlined in this guide will show us how to disassemble and replace the lights of the interior dome light of the BMW 5 Series. First, we get into the car and start by disassembling and removing the bulb dome light, by levering on the sides; then we disconnect the electrical connector of the lights if we want to replace the dome light, as shown in the video. At this point, if necessary, we replace the interior dome light bulbs with the same fitting; then we check the functionality of the lights and finally reassemble the dome light, fixing it properly!

Posted on 21 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Bulbs or LEDs in the Ceiling Light of a BMW 5 Series
How to Replace the Bulbs or LEDs in the Ceiling Light of a BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) In this video, see how to replace the bulbs or LEDs in the ceiling light of a BMW 5 Series. Use a screwdriver or plastic trim tool to pry between the…
Replace the Trunk Light Bulb in Your BMW 5 Series
Replace the Trunk Light Bulb in Your BMW 5 Series
BMW Serie 5 (1995-2003 / E39) Do you want to replace the trunk light bulb in your BMW 5 Series? Let's see how to do it in the video. First, open the trunk lid and remove the light…
How to Replace the Courtesy Lights on the BMW 5 Series?
How to Replace the Courtesy Lights on the BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) To replace the courtesy lights on the BMW 5 Series, use a tool to pry and completely detach the interior light fixture from its housing in the center…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos