Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 5
    4. : Bmw 5 Series bulb replacement

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Headlight bulb
Operation: Bmw 5 Series bulb replacement

Are the bulbs damaged? Let's see the replacement of the bulbs of the BMW 5 Series headlights. We lift the front hood, we find the caps placed behind the headlight. We take out the lamp holders from the headlight and we go to extract the damaged bulbs with the help of a screwdriver if we have difficulty. We mount the new bulbs in the headlight (always suitable type and voltage), insert the lamp holder in the headlight housing. We turn on the instrument panel and test the operation of the car's front and rear lights. We disassemble the headlight if we have difficulty in replacing it.


Posted on 20 January 2024 by ScegliAuto



How to replace the front headlight bulb of the BMW 5 Series E60.
BMW Serie 5 (2003-2010 / E61, E60) To correctly replace the headlight bulb of your BMW 5 Series E60 (year 2003-2010), simply follow the steps described in this new mini guide. First, m
Bmw 5 Series headlight position bulb replacement
BMW Serie 5 (2003-2010 / E61, E60) In this video tutorial we will see how to remove and replace the position light bulb of a BMW 5 Series third series. First we go to open the bonnet a
How to install or replace the welcome light on BMW 3 Series - 4 Series - 5 Series
BMW Serie 5 (2010-2017 / F11, F10) In this video tutorial we will see how to install or replace the welcome light bulb found on the door on a BMW 5 Series, but also on the 3 Series and

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos