Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Condensation from the Headlights of the BMW 5 Series

Model: BMW Serie 5 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight

See other generations:
Video tutorial

In this guide, you will learn the steps to remove condensation from inside the headlights of the BMW 5 Series. First, open the hood of the vehicle and begin disassembling the headlight by removing the mounting screws and disconnecting the power connector; then remove the plastic cap to allow the inside of the headlight to dry, replacing the lens if damaged (with a new one). If necessary, replace the entire headlight assembly, reattach it to the body, and check its proper operation.


Posted on 31 October 2026 by ScegliAuto


Related tutorials

How to Remove Condensation from the Front Headlight of BMW 5 Series
How to Remove Condensation from the Front Headlight of BMW 5 Series
BMW Serie 5 (2010-2017 / F10, F11) Today, you will see the instructions that will allow you to disassemble the front headlight and remove any condensation from the BMW 5 Series. First,…
How to Repair Cracks and Remove Condensation from BMW 5 Series Headlights
How to Repair Cracks and Remove Condensation from BMW 5 Series Headlights
BMW Serie 5 (2010-2017 / F10, F11) In this video, you will learn how to repair cracks and remove condensation from the Xenon headlights of a BMW 5 Series. Condensation in Xenon headlig…
Where to Find the OBD Port on a BMW 5 Series F10
Where to Find the OBD Port on a BMW 5 Series F10
BMW Serie 5 (2010-2017 / F10, F11) To locate the OBD port on your BMW 5 Series F10, follow the steps outlined in this guide. First, open the driver's door, then enter the vehicle and l…

How to Fix Code 84 Issue on the Chevrolet Cruze

In this video, you will see how to resolve the Code 84 issue when it appears on the instrument panel of the Chevrolet Cruze. The YouTuber uses an OBDII scanner connected to the EOBD port to correctly decode the error, which relates to the accelerator pedal that does not respond during engine acceleration. The solution is to check the throttle body, which helps send fuel to accelerate the vehicle; it was indeed damaged, and once replaced, the error code is cleared, allowing the vehicle to accelerate normally again.

Watch the video!


by ScegliAuto

More videos