Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Condensation from the Front Headlight of BMW 5 Series

Model: BMW Serie 5 F11, F10 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight

See other generations:
Video tutorial

Today, you will see the instructions that will allow you to disassemble the front headlight and remove any condensation from the BMW 5 Series. First, open the hood of the vehicle and start disassembling the front headlight by unscrewing the mounting screws and disconnecting the electrical connector for the bulbs; then, remove the outer lens to eliminate any condensation inside the headlight.

In these cases, it is generally better to opt for replacing the front headlight with a new one; check the operation of the lights in the assembly!


Posted on 15 April 2026 by ScegliAuto


Related tutorials

How to Remove Condensation from the Headlights of the BMW 5 Series
How to Remove Condensation from the Headlights of the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) In this guide, you will learn the steps to remove condensation from inside the headlights of the BMW 5 Series. First, open the hood of the vehicle an…
How to Repair Cracks and Remove Condensation from BMW 5 Series Headlights
How to Repair Cracks and Remove Condensation from BMW 5 Series Headlights
BMW Serie 5 (2010-2017 / F11, F10) In this video, you will learn how to repair cracks and remove condensation from the Xenon headlights of a BMW 5 Series. Condensation in Xenon headlig…
How to disassemble and replace the front headlight and bulbs of the BMW 5 Series
How to disassemble and replace the front headlight and bulbs of the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) In this guide we will see the instructions that will allow us to disassemble and replace the front headlight and its bulbs of the BMW 5 Series. First…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos