Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the front headlight and bulbs of the BMW 5 Series

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Headlight

In this guide we will see the instructions that will allow us to disassemble and replace the front headlight and its bulbs of the BMW 5 Series. First, open the hood of the car and start unscrewing the fixing screws of the front headlight that we find at the top and bottom of the headlight; then disconnect the electrical connector of the bulbs to remove it, as shown in the video. At this point, remove the inner plastic cap to replace the bulbs if necessary, replacing either the entire headlight; all that's left is to reassemble the optical group!

Posted on 23 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on BMW 5 Series
Replacing Headlight Bulbs on BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Are the bulbs damaged? Let's replace the front headlight bulbs on the BMW 5 Series. Lift the hood, locate the caps behind the front headlight. Pull t…
How to Change Front Headlight Bulbs on BMW 5 Series
How to Change Front Headlight Bulbs on BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Are the BMW 5 headlight bulbs burnt out? Let's replace them. Open the hood by pulling the lever located at the bottom right of the dashboard and secu…
How to Replace the Headlight Bulb on a BMW 5 Series
How to Replace the Headlight Bulb on a BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Follow these step-by-step instructions to remove and replace the headlight bulb on your BMW 5 Series. First, open the hood and start unscrewing the m…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos