Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a BMW 5 Series

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Headlight bulb

Follow these step-by-step instructions to remove and replace the headlight bulb on your BMW 5 Series. First, open the hood and start unscrewing the mounting screws located at the top of the headlight assembly; disconnect the bulb's electrical connector to remove the headlight unit, as shown in the video. Next, remove the plastic protective cover for the bulbs by releasing the low beam bulb; then replace it with a new one of the correct type and with the same fitting, reassembling the headlight!

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a BMW 5 Series E60
How to Replace the Headlight Bulb on a BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) To correctly complete the replacement of the headlight bulb on your BMW 5 Series E60 (2003-2010), follow the steps outlined in this mini guide. First…
Replacing the Headlight Bulb on the BMW 5 Series
Replacing the Headlight Bulb on the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, you will see step-by-step instructions to remove and replace the xenon headlight bulb on the BMW 5 Series. To access the headlight bulb, raise…
Replacing the Headlight Bulb on the BMW 5 Series
Replacing the Headlight Bulb on the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, we will see the instructions on how to remove and replace the low beam bulb of the headlight on the BMW 5 Series. First, open the hood of your…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos