Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb on the BMW 5 Series

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Headlight bulb

Today, you will see step-by-step instructions to remove and replace the xenon headlight bulb on the BMW 5 Series. To access the headlight bulb, raise the vehicle and remove the front wheel; then remove the plastic cover from the wheel well at the back of the headlamp to access the bulbs, as shown in the video. At this point, disconnect the electrical connector of the bulb, removing the xenon bulb along with its control unit; simply replace it with the new one that has the same fitting!

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulb on the BMW 5 Series
Replacing the Headlight Bulb on the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, we will see the instructions on how to remove and replace the low beam bulb of the headlight on the BMW 5 Series. First, open the hood of your…
Replacing the Front Headlight Lens on the BMW 5 Series
Replacing the Front Headlight Lens on the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) This guide shows how to remove and replace the plastic lens of the front headlight on the BMW 5 Series, following the instructions below. First, remo…
Replacing Front Headlight Position Bulb on BMW 5 Series
Replacing Front Headlight Position Bulb on BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) In this video tutorial, you will learn how to remove and replace the position bulb on a third-generation BMW 5 Series. First, open the hood and remov…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos