Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Interior Bulbs of the BMW 5 Series

Model: BMW Serie 5 F11, F10 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Interior dome light bulb

See other generations:
Video tutorial

Follow these brief and simple instructions to remove and replace the interior bulbs of the BMW 5 Series. First, get inside the vehicle and start by removing the main light fixture by prying it from the sides; then disconnect the electrical connector and replace the small bulb-type bulbs, as shown in the video.

Similarly, remove the other light fixtures, replacing the small bulb-type bulbs; if necessary, also replace the courtesy lights and ambient lights, following the video tutorial until the end!


Updated on 27 September 2026 by ScegliAuto


Related tutorials

Replacing the Headlight and Tail Lights on a BMW 5 Series
Replacing the Headlight and Tail Lights on a BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) In this guide, you will learn the steps to remove and replace the rear headlight and its bulbs on a BMW 5 Series. First, open the trunk and start rem…
How to replace the lights of the interior dome light of the BMW 5 Series
How to replace the lights of the interior dome light of the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) The steps outlined in this guide will show us how to disassemble and replace the lights of the interior dome light of the BMW 5 Series. First, we get…
How to Replace the Courtesy Lights on the BMW 5 Series?
How to Replace the Courtesy Lights on the BMW 5 Series?
BMW Serie 5 (2003-2010 / E60, E61) To replace the courtesy lights on the BMW 5 Series, use a tool to pry and completely detach the interior light fixture from its housing in the center…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos