Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight and Tail Lights on a BMW 5 Series

Model: BMW Serie 5 F11, F10 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light

See other generations:
Video tutorial

In this guide, you will learn the steps to remove and replace the rear headlight and its bulbs on a BMW 5 Series. First, open the trunk and start removing the side interior trim; then unscrew the internal screws of the headlight, disconnecting the electrical connector of the bulbs to remove it from the outside, as shown in the video.

At this point, separate the bulb holder to access the lights, replacing the faulty ones with new ones; assemble and reinstall the rear headlight, checking its operation!


Posted on 10 June 2026 by ScegliAuto


Related tutorials

Replacing Headlight Bulbs on BMW 5 Series
Replacing Headlight Bulbs on BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Are the bulbs damaged? Let's replace the front headlight bulbs on the BMW 5 Series. Lift the hood, locate the caps behind the front headlight. Pull t…
How to Replace the Position Light Bulbs in the BMW 5 Series?
How to Replace the Position Light Bulbs in the BMW 5 Series?
BMW Serie 5 (2003-2010 / E60, E61) In this tutorial, you will see how to replace the position light bulbs in the BMW 5 Series, a very simple and quick operation. Before proceeding, ens…
Where are the fuses located in the BMW 5 Series?
Where are the fuses located in the BMW 5 Series?
BMW Serie 5 (2003-2010 / E60, E61) All the fuse boxes of the BMW 5 Series are responsible for containing all the fuses that regulate the operation of the devices installed on the vehic…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos