Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Check Turn Signal Functionality

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Tail light

See other generations:
Video tutorial

If activating the turn signal causes the indicator light on the dashboard to blink very rapidly, it is likely that one of the bulbs (front headlight, front fender, rear light) has burned out. With the turn signal still activated, check which bulb is not blinking and replace it. In the video, the damaged bulb is the front headlight, and the replacement is extremely simple since you can access the bulb holder without removing anything; once the bulb is replaced, check its proper functionality.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Replacing the Side Turn Signal
Replacing the Side Turn Signal
BMW Serie 5 (1995-2003 / E39) To perform this operation, you need to open the hood and secure it to avoid any unpleasant surprises. The side turn signal is held in place by a side…
Check Functionality of the Contact Switch
Check Functionality of the Contact Switch
BMW Serie 5 (1995-2003 / E39) If the engine does not start when turning the ignition key to the start position, specifically if the starter motor does not engage, before assuming …
Replacement and Installation of the Side Turn Signal Light
Replacement and Installation of the Side Turn Signal Light
BMW Serie 5 (1995-2003 / E39) To replace the bulb of the side turn signal light, you need to remove the light assembly. Open the hood and locate the plastic clip that secures the …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos