Do it yourself
Frequently asked questions about cars and motorcycles

Replacement and Installation of the Side Turn Signal Light

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Side marker light

To replace the bulb of the side turn signal light, you need to remove the light assembly. Open the hood and locate the plastic clip that secures the light assembly. Pull the light assembly forward to remove it. Disconnect the bulb holder and replace the old bulb with the new one, ensuring it fits correctly in its socket. Then, reposition the light assembly by sliding it into the side guides on the headlamp and reattach the plastic clip. It is advisable to check the proper functioning before reassembling everything.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 5 (1995-2003 / E39) If activating the turn signal causes the indicator light on the dashboard to blink very rapidly, it is likely that one of the bulbs (front headlight,…
BMW Serie 5 (1995-2003 / E39) To perform this operation, you need to open the hood and secure it to avoid any unpleasant surprises. The side turn signal is held in place by a side…
BMW Serie 5 (1995-2003 / E39) To replace the bulb of the side turn signal, you need to remove the light from the fender; the procedure is very simple since the light is secured to…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos