Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Center Console of the BMW 5 Series E60

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Dashboard

To remove the center console of the dashboard, specifically the DVD reading unit of the navigation system, start by removing the central trim piece that houses the air vents and the parking turn signal button. Once the trim is removed, you can unscrew the mounting screws of the climate control unit and then proceed to the DVD reading unit of the navigation system. During the removal of these components, pay special attention to disconnecting the power connectors and command signals.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Heater Resistor in the BMW 5 Series?
How to Remove the Heater Resistor in the BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) In this tutorial, you will see how to remove the heater resistor in the BMW 5 Series, a very simple task to perform, for example, if you need to repl…
Disassembly and Replacement of the Cabin Fan in a BMW 5 Series
Disassembly and Replacement of the Cabin Fan in a BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Here are step-by-step instructions to disassemble and replace the cabin fan in your BMW 5 Series. First, get inside the vehicle and begin removing th…
How to Replace the Driveshaft Bearing on BMW 5 Series E60
How to Replace the Driveshaft Bearing on BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) In today's tutorial video, you will learn how to disassemble and replace the driveshaft bearing on the BMW 5 Series E60, following the instructions b…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos