Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the central air vents of the BMW 5 Series

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Air vents

The instructions in this guide will show us how to disassemble and replace the central air vents of the BMW 5 Series. First, we get into the car and start removing the central plastic cover of the dashboard, detaching it along with the air vents; then we unscrew the fixing screws of the air vents, disconnecting the electrical connector to remove them, as shown in the video. At this point, we carry out the repair or replacement, then fixing them on the central cover; we reassemble the dashboard, applying the reverse process!

Posted on 1 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Ventilation Vents on a BMW 5 Series
How to Replace the Ventilation Vents on a BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) As a first step, disconnect the battery cables to protect any sensitive circuits and work safely. To remove the vents, grasp one end of the trim that…
Replacing Air Vents on BMW 5 Series
Replacing Air Vents on BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Replacing the air vents is a very simple task on any car model. Although this example shows the removal of the rear vents on a BMW 5 Series F10, the …
How to Remove the Door Panel of the BMW 5 Series?
How to Remove the Door Panel of the BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) To remove the door panel of the BMW 5 Series, use a tool to pry off the trim located at the top of the panel. Once this trim is removed, you can unsc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos