Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Air Vents on BMW 5 Series

Model: BMW Serie 5 F11, F10 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Air vents

See other generations:
Video tutorial

Replacing the air vents is a very simple task on any car model. Although this example shows the removal of the rear vents on a BMW 5 Series F10, the procedure is usually the same.

The only tool you need is a simple plastic prying tool. You can also use a small flathead screwdriver, but be careful not to scratch the plastic around the vents.

Insert the prying tool into the gaps around the vents and gently pry outward, removing them slowly. If there are connectors attached to the plastic of the vents, as shown in the video, disconnect them and you're done.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (2010-2017 / F11, F10) In today's tutorial video, you will learn how to remove the dashboard air vents on the BMW 5 Series F10 in simple and quick steps. First, get inside …
BMW Serie 5 (2010-2017 / F11, F10) Using a plastic wedge, remove the entire trim panel that surrounds the center air vents and extends above the glove compartment. This plastic piece i…
BMW Serie 5 (1995-2003 / E39) Before you start, open the trunk lid of your BMW 5 Series. Begin by releasing the clips that secure the hydraulic lift supports, using a flathead scr…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos