Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Light Bulbs in the BMW 5 Series?

Model: BMW Serie 5 E60, E61 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, you will see how to replace the position light bulbs in the BMW 5 Series, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety.

Start by opening the hood, then using a T30 Torx wrench, remove the two bolts located on the upper edge of the headlight. Next, remove the lower bolt with an 8mm wrench, disconnect the connector, and separate the light assembly from the body.

At this point, you can open the rear cover and proceed to replace the bulb.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to replace the lights of the interior dome light of the BMW 5 Series
How to replace the lights of the interior dome light of the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) The steps outlined in this guide will show us how to disassemble and replace the lights of the interior dome light of the BMW 5 Series. First, we get…
Replacing the Interior Bulbs of the BMW 5 Series
Replacing the Interior Bulbs of the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Follow these brief and simple instructions to remove and replace the interior bulbs of the BMW 5 Series. First, get inside the vehicle and start by r…
Replacing the Headlight and Tail Lights on a BMW 5 Series
Replacing the Headlight and Tail Lights on a BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) In this guide, you will learn the steps to remove and replace the rear headlight and its bulbs on a BMW 5 Series. First, open the trunk and start rem…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos