Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Courtesy Lights on the BMW 5 Series?

Model: BMW Serie 5 E60, E61 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Interior dome light bulb

See other generations:
Video tutorial

To replace the courtesy lights on the BMW 5 Series, use a tool to pry and completely detach the interior light fixture from its housing in the center of the headliner. Once the light fixture is removed, you can pull the bulbs from the inside and disconnect the connector.

After inserting the new bulbs, reconnect the connector to the light fixture. It can now be reinserted into its housing, and check its operation.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

Replacing the Interior Bulbs of the BMW 5 Series
Replacing the Interior Bulbs of the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Follow these brief and simple instructions to remove and replace the interior bulbs of the BMW 5 Series. First, get inside the vehicle and start by r…
Where are the fuses located in the BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) In the BMW 5 Series, all fuses are contained within the designated fuse boxes installed in the vehicle: in this car model, you can find two. The firs…
How to replace the lights of the interior dome light of the BMW 5 Series
How to replace the lights of the interior dome light of the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) The steps outlined in this guide will show us how to disassemble and replace the lights of the interior dome light of the BMW 5 Series. First, we get…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos