Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Pillars and Interior Trim of the BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006

This guide provides instructions on how to remove and replace the pillars and repair the interior fabric trim of the BMW 3 Series. First, get inside the vehicle with a thin plastic trim tool; then, detach and remove the plastic cover of the pillar, as shown in the video. At this point, proceed to repair or replace the fabric by unscrewing the nuts and removing the wiring, securing it properly on the inner pillar; finally, reinstall the plastic cover of the pillar, following the video tutorial to the end!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Interior Roof Lining of the BMW 3 Series
How to Remove the Interior Roof Lining of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) In this brief guide, learn how to remove the roof lining or headliner of the BMW 3 Series by following these simple steps. First, get inside the vehi…
How to Remove the Headliner in a BMW 3 Series?
How to Remove the Headliner in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, you will see how to remove the headliner in a BMW 3 Series, a very simple and quick operation. First, open the trunk. Then, remove …
Removing and Replacing the Headliner of the BMW 3 Series
Removing and Replacing the Headliner of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today, you will see the instructions that will allow you to remove and replace the headliner of the BMW 3 Series. First, get inside the vehicle and s…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos