Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Side Plastic Cover of the Driver's Seat

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Seat

See other generations:
Video tutorial

The driver's seat of the vehicle in question features electric adjustment: on the side of the seat, you will find buttons for adjusting the seat (height and depth) and the inclination of the backrest. The buttons are attached to a plastic cover cap, which is mounted on the side of the seat and secured with screws and clips: to remove this cap, you need to remove both the screws and the clips, then pry the adjustment buttons out from the back using a screwdriver and complete the disassembly by disconnecting the connectors.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (1995-2003 / E39) First, remove the side dome light using a plastic trim tool (after disconnecting the power supply) above the rear seat back. Remove the headrests fro…
BMW Serie 5 (1995-2003 / E39) The plastic trim located at the A-pillar, covering the seatbelt, is simply clipped in with pressure fasteners and consists of two pieces, one lower a…
BMW Serie 5 (1995-2003 / E39) Before proceeding with the removal, use the electric adjustment controls to move the seat all the way up, then all the way back (to access the front …

Fuses Placement and Diagram for the Mercedes Vito

Check the diagram and placement of the fuse boxes for the Mercedes Vito by following the instructions below. First, open the bonnet and locate the external fuse box; you will find it by removing the plastic cover situated at the top of the engine compartment, as shown in the video. At this point, find another fuse box in the cabin, specifically under the driver's seat; use the owner's manual to find the fuse diagram and replace any faulty fuse with a new one that has the same amperage rating.

Watch the video!


by ScegliAuto

More videos