Do it yourself
Frequently asked questions about cars and motorcycles

Removing the A-Pillar Trim

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Body

See other generations:
Video tutorial

The plastic trim located at the A-pillar, covering the seatbelt, is simply clipped in with pressure fasteners and consists of two pieces, one lower and one upper. To remove them, open both doors, detach the seals from the edges, and start removing the trim from the lower piece before moving to the upper piece; gently pry off the elements from the sides to avoid damaging the pressure fasteners.

It may happen that the fastener comes off the trim and remains stuck in the pillar.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (1995-2003 / E39) .. you can access the mounting screws for the pillar trim. Removing the pillar can be useful for restoring it, as it often tends to fade due to sunlight.. …
BMW Serie 5 (2003-2010 / E60, E61) If you need to remove the front fender, start by lifting the vehicle on appropriate jack stands and removing the front wheel. Next, remove the wheel …
BMW Serie 5 (1995-2003 / E39) This guide shows you how to remove the trim from the upper driver side A-pillar. The procedure is the same for the passenger side. To perform this pr…

Fuses Placement and Diagram for the Mercedes Vito

Check the diagram and placement of the fuse boxes for the Mercedes Vito by following the instructions below. First, open the bonnet and locate the external fuse box; you will find it by removing the plastic cover situated at the top of the engine compartment, as shown in the video. At this point, find another fuse box in the cabin, specifically under the driver's seat; use the owner's manual to find the fuse diagram and replace any faulty fuse with a new one that has the same amperage rating.

Watch the video!


by ScegliAuto

More videos