Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Driver Side A-Pillar Trim

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Body

See other generations:
Video tutorial

This guide shows you how to remove the trim from the upper driver side A-pillar. The procedure is the same for the passenger side.

To perform this procedure, open the cover and remove the screws and bolt. Remove the trim by pulling it out from its seals, starting from the top end. For installation, follow the same procedure in reverse order.

Before proceeding, check that the retaining clips are not damaged, and if they are, replace them.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (2010-2017 / F11, F10) The BMW 5 Series produced from 2010 to 2017 has two fuse boxes inside. The first fuse box is located in the cabin, inside the passenger side glove co…
BMW Serie 5 (2003-2010 / E60, E61) This model of the German vehicle has 3 fuse boxes. The first is located in the cabin, right behind the passenger side glove box panel, while the seco…
BMW Serie 5 (1995-2003 / E39) The front hood release cable runs from the release lever, located near the driver’s side kick panel, to the hood latch; this cable is divided into tw…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos