Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Hood Release Cable Replacement

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Body

The front hood release cable runs from the release lever, located near the driver’s side kick panel, to the hood latch; this cable is divided into two parts. To replace it, first remove the driver’s side cabin air filter housing to access the grommet near the brake booster. Once the old cable is removed, insert the new one, attaching it first to the release lever and then routing it through the various housings until it reaches the latch, ensuring to properly secure the grommets and lubricate the cable sheath and the latch with spray grease.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Hood Release Cable on a BMW 5 Series E39
How to Replace the Hood Release Cable on a BMW 5 Series E39
BMW Serie 5 (1995-2003 / E39) In today's tutorial, you will learn how to replace the hood release cable on a BMW 5 Series E39 by following these simple steps. First, open the fron…
Removing the Front Hood Lock
Removing the Front Hood Lock
BMW Serie 5 (1995-2003 / E39) The front hood of the car model in question is equipped with two locking mechanisms located at the front of the grille. To begin the removal process,…
Fixing Internal Door Handle
Fixing Internal Door Handle
BMW Serie 5 (1995-2003 / E39) If the internal door handle tends to stay slightly open and does not have that characteristic spring effect when returning, the cable sheath may have…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos