Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter in a BMW 5 Series F10

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Air filter

Here, you will learn how to properly replace the air filter located in your BMW 5 Series F10 (model years 2010-2017). This guide is also valid for the F11 model. First, turn off the vehicle completely and lift the hood. Next, remove the central protective cover and proceed to take out the old air filter. At this point, take the new filter and insert it into the designated housing. Finally, reinstall the protective cover correctly, and the procedure is complete.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a BMW 5 Series F10
How to Replace the Cabin Air Filter in a BMW 5 Series F10
BMW Serie 5 (2010-2017 / F11, F10) To learn how to replace the cabin air filter in your BMW 5 Series F10, carefully read the following mini guide. With the provided instructions, you w…
How to Replace the Glow Plugs on the BMW 5 Series (530d) F10 N57
How to Replace the Glow Plugs on the BMW 5 Series (530d) F10 N57
BMW Serie 5 (2010-2017 / F11, F10) In this video tutorial, you will see the necessary steps to remove and replace the engine glow plugs on the BMW 5 Series F10, specifically the 530d w…
Removing the Air Vents on the BMW 5 Series F10
Removing the Air Vents on the BMW 5 Series F10
BMW Serie 5 (2010-2017 / F11, F10) In today's tutorial video, you will learn how to remove the dashboard air vents on the BMW 5 Series F10 in simple and quick steps. First, get inside …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos