Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs on the BMW 5 Series (530d) F10 N57

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Glow plugs

In this video tutorial, you will see the necessary steps to remove and replace the engine glow plugs on the BMW 5 Series F10, specifically the 530d with the N57 engine. First, open the hood of your car and remove the plastic protective cover; then remove the upper air intake duct along with the air filter box by detaching all the clips and unscrewing the screws. At this point, disconnect the four wires from the glow plugs and use a socket wrench with an extension to unscrew and remove them; all that’s left is to replace them with new ones!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Spark Plugs on BMW 5 Series F10 2.0 Twin Turbo
Replacing Spark Plugs on BMW 5 Series F10 2.0 Twin Turbo
BMW Serie 5 (2010-2017 / F11, F10) Today, you will learn how to remove and replace the engine spark plugs on the BMW 5 Series F10 with a 2.0 Twin Turbo engine (code N20). First, open t…
How to Replace the Rear Headlight Bulb on a BMW 5 Series F10
How to Replace the Rear Headlight Bulb on a BMW 5 Series F10
BMW Serie 5 (2010-2017 / F11, F10) To learn how to properly replace the rear headlight bulb on your BMW 5 Series F10, carefully read the following guide and follow all the steps descri…
Where to Find the OBD Port on a BMW 5 Series F10
Where to Find the OBD Port on a BMW 5 Series F10
BMW Serie 5 (2010-2017 / F11, F10) To locate the OBD port on your BMW 5 Series F10, follow the steps outlined in this guide. First, open the driver's door, then enter the vehicle and l…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos